Products – Vintec Equipment

CK Series

RTGT — Wed, 09 Mar 2016 08:26:37 +0000

Rotating (360°) crusher for primary, secondary and selected demolition with FAST JAWS CHANGE SYSTEM (5 MINUTE). With 4 available jaws the change system is fully hydraulic and semi-automatic to guarantee versatility and safety, without loosing power and speed.

The CK attachment allows you to do every kind of demolition:

Primary Demolition: to destroy a building and remove its material.
Secondary Demolition: to separate or reduce in smaller scraps what has been already demolished, making easier the removal and transportation.
Selected Demolition: where it will be necessary to extract and recuperate elements or precious components (copper, aluminum, iron, steel, wood…) or for the drainage of area of environmental impact in which the presence of toxic, inflammable and contaminating materials.

MAIN FEATURES:

Primary, Secondary And Selected Demolition
International Patented
5 Minute Jaws Change System
4 Exchangable Jaws
Powerful
Quick & Safe
Hardox In My Body

The post CK Series appeared first on Vintec Equipment.

Digging Grabs

RTGT — Tue, 15 Mar 2016 05:11:17 +0000

Hydraulic equipment designed for excavating operations.

With vertical cylinders and teeth it is designed to ensure high penetration.

The digging grab can be supplied with or without teeth and with or without hydraulic rotator.

The steelwork and cylinders are made of high quality and durable raw materials while the blades, which are subject to abrasion, are in wear-resistant steel HB400/500.

The post Digging Grabs appeared first on Vintec Equipment.

Ditch Cleaning Bucket

RTGT — Tue, 15 Mar 2016 06:13:54 +0000

A specific bucket range to clean and maintain water drainage ditches, embankments, little river beds and dikes.
The standard structure is made with a round profile and one or more central reinforcement ribs depending on the width of the bucket.

The post Ditch Cleaning Bucket appeared first on Vintec Equipment.

DSG Series

RTGT — Fri, 11 Mar 2016 02:52:49 +0000

Screen, crush, pulverize, aerate, blend, mix, separate, feed and load materials… Just with one product!

The DSG is a roller screening bucket that can screen, crush and mix different kinds of materials such as:

Soil
Sand
Compost

The particular system of operation, the frame design and the unique conformation of rollers/rotating blades ensure high performance allowing the treatment of large volumes of material. The rollers are made of high wear-resistant steel (Hardox® 500/600), are easily replaceable, allowing to adjust output material size according to the specific user’s needs. The adoption of two hydraulic engines, the chain drive system and the use of the best available components on the market, reduce the need of maintenance, increasing the productivity benefits and lowering the management costs. The DSG screening bucket is particularly suitable to treat humid, wet and “sticky” material. The DSG screening bucket is designed for excavator and wheel loader use. The attachment plates properly designed to fit the original excavator/wheel loader to facilitate perfect position for discharging the screened material.

The post DSG Series appeared first on Vintec Equipment.

FB Series

RTGT — Fri, 11 Mar 2016 02:22:51 +0000

The crushing bucket “FB” has been designed and built to meet the increasing necessity for immediate on-site recycling and reuse of waste material deriving from construction and demolition work. The high performance levels of the crushing bucket “FB”, available in four models, make it the ideal solution, not only for small and medium-sized construction sites with limited amounts of waste material, but also for extremely demanding work conditions, such as in quarries. Its structure is entirely made of Hardox 400 and was designed to support the heaviest work loads and stresses over time. It is fitted with a piston engine and equipped with a fixed and a moving jaw: the adjustment of the latter allows the size of the crushed material to be adapted to the different operating needs.

The setting of the mobile jaw in the FB models allows to obtain crushed material of different sizes, following the need, from 18 to 130 mm.

The post FB Series appeared first on Vintec Equipment.

Log Grabs

RTGT — Tue, 15 Mar 2016 05:14:14 +0000

The log grabs are mostly used for agricultural and forestry works, but also in the recycling sector.

Vintec Equipment’s log grab is equipped with one cylinder to allow opening and closure phases.

The blades on the jaws have a specific profile to help grabbing the logs or other different material.

The structure is completely made of high resistance steel with heat treatment to ensure a durable life to this tool in each condition.

The post Log Grabs appeared first on Vintec Equipment.

MD Series

RTGT — Fri, 11 Mar 2016 03:05:00 +0000

The MD Series has been designed to screen and handle demolished materials. Thanks to the specific configuration, the considerable gripping force and above all the 360° hydraulic rotation, these grapples can be used in the most precarious conditions, ensuring greater productivity without requiring continuous manual work. Each model in the range stands out for the reliability and the sturdiness of the body, made from the most innovative steel to support the most heavy-duty workloads over time.

The post MD Series appeared first on Vintec Equipment.

PM Series

RTGT — Tue, 15 Mar 2016 03:46:44 +0000

Made to move various materials with the special 3 + 2 tooth valve configuration, the PM Series is noted for its high productivity and versatility. The wide range of uses includes moving medium and large stones, operations in which speed and precision are increased both by hydraulic rotation and bucket-cylinder movement. Thanks to its high clamping-force, it is often used to demolish houses and structures not built with concrete and metal reinforcements and will perform the double operation of demolition and material-loading. Built to last, it is made entirely of HARDOX 400 (steel with high abrasion resistance and excellent mechanical features) and has completely protected cylinders and rotation components.

The post PM Series appeared first on Vintec Equipment.

Polyp Grabs

RTGT — Tue, 15 Mar 2016 03:53:17 +0000

Polyp-grabs are hydraulic equipment suitable for the handling of bulk materials: scrap, urban waste, industrial waste, machine shop rejections, rocks,
paper, cardboard, plastic, wood and tires. You can find different type of polyp grabs:

The compact version range with the cylinders partially inserted inside the grabs to reduce the height;
The range with outside vertical cylinders fixed to the structure. Protections and guards prevent damages to pipes and cylinders.

Every polyp grab can be supplied with a rotation device.

The shape of the tines is optimized to facilitate the penetration and collect as much material as possible.

The steelwork and cylinders are made with materials of high quality and durability, while the parts subject to abrasion are made of wear-resistant steel HB400.

The post Polyp Grabs appeared first on Vintec Equipment.

RP Series

RTGT — Fri, 11 Mar 2016 02:56:05 +0000

RP2000 is a specifically designed attachment to meet the growing need in cutting railway rails. Equipped with a hydraulic 360° rotation, it has a special Heavy Duty rotor that guarantees high reliability and durability, allowing also easy positioning, and accuracy handling this tool. The big hydraulic cylinder provides a 139t force and together with the specific jaw’s mechanism, you can cut rails UIC 60; the cylinder is set in “overturned” position to ensure maximum protection from accidental damages. RP2000 is equipped with special cutting blades 4 times usable, to ensure high durability before to replace them. The structure, completely made of Hardox, is heat treated to improve the mechanical strength, reliability and durability.

The RP2000 has been developed as the main equipment for railways and subways maintenance and modernization.

The post RP Series appeared first on Vintec Equipment.